[1] Pengfei Guo, Xin Lin, et al. Passive behavior of nickel-based superalloys prepared by high-deposition-rate laser solid forming additive manufacturing. Corros. Sci., 177(2020), 109036-1-109036-15.
[2] Pengfei Guo, Xin Lin, et al. Microstructure and electrochemical anodic behavior of Inconel 718 fabricated by high-power laser solid forming. Electrochim. Acta., 276(2018),247-260.
[3] Pengfei Guo, Xin Lin, et al. Electrochemical behavior of Inconel 718 fabricated by laser solid forming on different sections. Corros. Sci., 132(2018), 79-89.
[4] Pengfei Guo, Xin Lin, et al. Distinction in anodic dissolution behavior of Inconel 718 prepared by different forming technologies. J. Electrochem. Soc., 165(2018), E1-E10.
[5] Pengfei Guo, Xin Lin, et al. Electrochemical removal of different phases from laser solid formed Inconel 718. J. Electrochem. Soc., 167(2017), E151-E157.
[6] Pengfei Guo, Xin Lin, et al. Columnar structure and electrochemical anisotropy of a nickel-based superalloy fabricated via laser solid forming. J. Appl. Electrochem., 7(2017), 1083-1090.
[7] Pengfei Guo, Xin Lin, et al. Surface improvement of laser solid forming Inconel 718 by electrochemical machining. J. Laser Appl., 31(2019), 022516-1-022516-6
[8] Yongming Ren, Xin Lin, Pengfei Guo, et al. Low cycle fatigue properties of Ti-6Al-4V alloy fabricated by high-power laser directed energy deposition: Experimental and prediction. Int. J. Fatigue, 127(2019), 58-73
[9] Jiaqiang Li, Xin Lin, Pengfei Guo,et al. Electrochemical behaviour of laser solid formed Ti-6Al-4V alloy in highly concentrated NaCl solution. Corros. Sci., 142(2018), 161-174.
[10] Jianjun Xu, Xin Lin, Pengfei Guo, et al. The initiation and propagation mechanism of the overlapping zone cracking during laser solid forming of IN-738LC superalloy. J. Alloy Compd., 749(2018), 859-870.
[11] Jianjun Xu, Xin Lin, Pengfei Guo, et al. The effect of preheating on microstructure and mechanical properties of laser solid forming IN-738LC alloy. Mat. Sci. Eng. A., 691(2017), 71-80.
[12] Jianjun Xu, Xin Lin, Pengfei Guo, et al. The microstructure evolution and strengthening mechanism of a gamma’-strengthening superalloy prepared by induction-assisted laser solid forming. J. Alloy Compd., 780(2019): 461-475.
[13] Xindi Wang, Ningsong Qu, Pengfei Guo, et al. Electrochemical machining properties of the laser rapid formed Inconel 718 alloy in NaNO3 solution. J. Electrochem. Soc., 164(2017), E548-E559.
[14] Qiang Zhang, Jing Chen, Pengfei Guo, et al. Texture and microstructure characterization in laser additive manufactured Ti-6Al-2Zr-2Sn-3Mo-1.5Cr-2Nb titanium alloy. Mater. Design., 88 (2015), 550-557.
[15] Jiaqiang Li, Xin Lin, Jian Wang, Min Zheng, Pengfei Guo, et al. Effect of stress-relief annealing on anodic dissolution behaviour of additive manufactured Ti-6Al-4V via laser solid forming. Corros. Sci., 153(2019), 314-326.
[16] Jiaqiang Li, Xin Lin, Min Zheng, Jian Wang, Pengfei Guo, et al. Distinction in anodic dissolution behavior on different planes of laser solid formed Ti-6Al-4V alloy. Electrochim. Acta., 283(2018),1482-1489.
[17] Fenggang Liu, Xin Lin, Menghua Song, Haiou Yang, Kan Song, Pengfei Guo, et al. Effect of tempering temperature on microstructure and mechanical properties of laser solid formed 300M steel. J. Alloy Compd., 689(2016), 225-232.
[18] 王維，郭鵬飛，等. 超聲波對BT20鈦合金激光沉積修復作用機制探究. 紅外與激光工程，43(2014)，2453-2459. (EI)
[19] 王維，郭鵬飛，等. 超聲波對BT20鈦合金激光熔覆過程的作用. 中國激光，40(2013), 0803004-1-0803004-5. (EI)
[20] 楊光，郭鵬飛，等. 超聲波在BT20鈦合金中的傳播特性及熔池中超聲場的分布研究. 中國激光，40(2013), 1203009-1-1203009-7. (EI)