馬玲

發布人：機汽學院時間：2022-09-08瀏覽：

馬玲副教授碩士生導師

最高學歷：博士研究生
從事專業：教師
聯系電話：
電子信箱： ml719210@163.com
工作單位：青島理工大學機械與汽車工程學院
通信地址：青島經濟技術開發區嘉陵江東路777號

個人簡介

工學博士，畢業于重慶大學，曾至美國西北大學聯合培養兩年。主要從事金屬材料的本構模型建立、高溫交變加載下的疲勞蠕變壽命預測理論研究以及結構失效分析的有限元模擬仿真。在《Fatigue & Fracture of Engineering Materials & Structures》、《Advanced Engineering Materials》、《Engineering Failure Analysis》、《機械工程學報》等國內外期刊上公開發表學術論文8篇，其中SCI、EI收錄7篇。

教育經歷

（1）2012-9至2018-6, 重慶大學, 機械工程,工學博士
（2）2015-9至2017-9, 美國西北大學, 機械工程系, 聯合培養博士
（3）2008-9至2012-6, 重慶大學, 機械設計制造及自動化, 學士

工作履歷

2018年7月-至今, 青島理工大學, 機械與汽車工程學院, 教師

教學情況

主授課程

機械設計；傳熱學

科研情況

研究領域

1、金屬材料的力學行為研究
2、疲勞-蠕變作用下結構的失效壽命預測

科研項目

1. 省自然科學基金，基于耦合損傷本構模型的齒輪彎曲疲勞失效分析，15萬元，2022.01-2024.12.

科研論文

1.  Ma L., Luo Y., Wang Y. et al. (2017) Constitutive and Damage Modelling of H11 Subjected to Low Cycle Fatigue at High Temperature, Fatigue & Fracture of Engineering Materials & Structures, Vol.40, No.12, p.2107-2117.
2.  Ma L., Luo Y., Wang Y. et al. (2018) Fatigue and Ratcheting Assessment of AISI H11 at 500 ℃ Using Constitutive Theory Coupled with Damage, Fatigue & Fracture of Engineering Materials & Structures, Vol.41, No.3, p.642-652. 
3.  Ma L., Luo Y., Wang Y. et al. (2017) Visco-Plastic Constitutive Model for Cyclic Responses Simulation and Lifetime Prediction of Hot-Work Tool Steel H13 at Elevated Temperature, Steel Research Internatioanl, Vol.88, No.11, p.1-12.
4.  馬玲,羅遠新,王勇勤等.（2017）疲勞蠕變交互作用下擠壓筒設計理論及壽命預測模型，機械工程學報，Vol.53, No.16, p.163-172.
5.  Ma L., Wang Y., Luo Y. et al. (2016) Determination of Self-excited Vibration Criterion for Strip Rolling mill, WSEAS Transactions on Applied And Theoretical Mechanics, Vol.11, p.97-106.
6. Ma L. , Wang Y. , Luo Y. (2020) A method for assessing lifetime of an extrusion container subjected to fatigue-creep interaction[J]. Engineering Failure Analysis, 118:1-9. 
7. Ma L. , Wang Y. , Luo Y. (2020) Influence of shrinkage loss on failure of an extrusion container associated with creep deformation[J]. Mechanics Based Design of Structures and Machines, 1-14.
8. Ma L. , Zhang L. , Guo F. et al. (2021) High-Temperature Mechanical Behavior Assessment based on a Developed Constitutive Model of Inconel 718 Fabricated by Selective Laser Melting[J]. Advanced Engineering Materials, 23 (8):1-10.

1. Ma L., Luo Y., Wang Y. et al. (2017) Constitutive and Damage Modelling of H11 Subjected to Low Cycle Fatigue at High Temperature, Fatigue & Fracture of Engineering Materials & Structures, Vol.40, No.12, p.2107-2117.
2. Ma L., Luo Y., Wang Y. et al. (2018) Fatigue and Ratcheting Assessment of AISI H11 at 500 ℃ Using Constitutive Theory Coupled with Damage, Fatigue & Fracture of Engineering Materials & Structures, Vol.41, No.3, p.642-652.
3. Ma L., Luo Y., Wang Y. et al. (2017) Visco-Plastic Constitutive Model for Cyclic Responses Simulation and Lifetime Prediction of Hot-Work Tool Steel H13 at Elevated Temperature, Steel Research Internatioanl, Vol.88, No.11, p.1-12.
4. 馬玲,羅遠新,王勇勤等.（2017）疲勞蠕變交互作用下擠壓筒設計理論及壽命預測模型，機械工程學報，Vol.53, No.16, p.163-172.
5. Ma L., Wang Y., Luo Y. et al. (2016) Determination of Self-excited Vibration Criterion for Strip Rolling mill, WSEAS Transactions on Applied And Theoretical Mechanics, Vol.11, p.97-106.
6. Ma L. , Wang Y. , Luo Y. (2020) A method for assessing lifetime of an extrusion container subjected to fatigue-creep interaction[J]. Engineering Failure Analysis, 118:1-9.
7. Ma L. , Wang Y. , Luo Y. (2020) Influence of shrinkage loss on failure of an extrusion container associated with creep deformation[J]. Mechanics Based Design of Structures and Machines, 1-14.
8. Ma L. , Zhang L. , Guo F. et al. (2021) High-Temperature Mechanical Behavior Assessment based on a Developed Constitutive Model of Inconel 718 Fabricated by Selective Laser Melting[J]. Advanced Engineering Materials, 23 (8):1-10.

教師隊伍

全院教師

馬玲